With our existing PDA license and port licenses, we have the ability and flexibility to supply bunker products to multiple locations in Malaysia such as the Kemaman Supply Base (KSB), Asian Supply Base (ASB), Johor Port and MMHE Shipyard. This allows us to optimize our delivery schedule and provide prompt turnaround for our bunker vessels, thereby benefitting our customers.
Marine Gas Oil (also known as Euro 5M)
TECHNICAL SPECIFICATIONS:
Properties |
Guaranteed Level (Minimum) |
Guaranteed Level (Maximum) |
Test Method |
Colour (ASTM) | - | 2.0 | ASTM D1500 / D6045 |
Ash, mass % | - | 0.01 | ASTM D482 / IP4 |
Cloud point, ˚C | - | 19.0 | ASTM D5772 / D2500 / D5771 / D5773 / IP219 |
Flash point, ˚C | 60 | - | ASTM D93 / IP34 |
Kinematic viscosity at 40˚C, mm²/s |
1.5 | 5.8 | ASTM D445 / D7042 / IP71 |
Copper corrosion (3h at 100˚C) |
- | 1 | ASTM D130 / IP154 |
Water by distillation vol% | - | 0.05 | ASTM D95 |
Sediment by extracton, wt% | - | 0.01 | ASTM D473 |
Carbon residue on 10% bottoms, w% |
- | 0.20 | ASTM D4530 / D189 / IP13 |
Density at 15˚C, kg/L | - | 0.845 | ASTM D4052 / D1298 |
Acid number, mg-KOH/g | - | 0.25 | ASTM D664 / D974 |
Electrical conductivity, pS/m | 50 | - | ASTM 2624 |
Certane index / Certane number |
49 49 |
- - |
ASTM D4737 / D976 ASTM D6890 / D613 / IP498 |
Physical distillation at 95% recovered volume, ˚C / Simulated distillation at 95% recovered mass, ˚C |
- | 360 386 |
ASTM D86 ASTM D2887 |
Total sulphur, mg/kg | - | 10.0 | ASTM D5453 / D2622 / D4294 / D7039 / IP336 |
Lubricity, μm | - | 460 | ASTM D6079 / IP450 |
Polycyclic Aromatic Hydrocarbons, % mass |
- | 8.0 | EN 12916 / ASTM D6591 |
Palm Methyl Ester, % vol. | - | 0.0 | ASTM D7371 |
VLSFO RMG380CST 0.5%
TECHNICAL SPECIFICATIONS:
Test |
Unit |
Method |
Spec |
Result |
DENSITY AT 15 DEG C | KG/L | ISO 3675 | 0.9910 MAX | 0.9559 |
KINEMATIC VISCOSITY AT 50 DEG C | CST | ISO 3104 | 380 MAX | 334.2 |
SULPHUR | % WT | ISO 8754 | 3.5 MAX | 0.379 |
WATER BY DISTILLATION | % VOL | ISO 3733 | 0.5 MAX | 0.10 |
FLASH POINT | DEG C | ISO 2719 | 60 MIN | 80.0 |
POUR POINT | DEG C | ISO 3016 | 30 MAX | +27 |
CARBON RESIDUE | % WT | ISO 10370:2014 | 18 MAX | 8.26 |
ASH | % WT | ISO 6245 | 0.10 MAX | 0.023 |
TOTAL SEDIMENT AGED | % WT | ISO 10370-2 | 0.10 MAX | 0.03 |
VANADIUM | MG/KG | IP 501 | 350 MAX | 3 |
ALUMINIUM + SILICON | MG/KG | IP 501 | 60 MAX | 56(22+34) |
ZINC | MG/KG | IP 501 | 15 MAX | 3 |
PHOSPHORUS | MG/KG | IP 501 | 15 MAX | 2 |
CALCIUM | MG/KG | IP 501 | 30 MAX | 11 |
SODIUM | MG/KG | IP 501 | 100 MAX | 27 |
CCAI | - | CALCULATION | 870 MAX | 818 |
HYDROGEN SULPHIDE | MG/KG | IP 570 | 2.00 MAX | <0.60 |
TOTAL ACID NUMBER | MG KOH/G | ASTM D664 | 2.50 MAX | 0.62 |
CLEANLINESS | RATING | ASTM D4740 | REPORT | NO.1 |
COMPATIBILITY | RATING | ASTM D4740 | REPORT | NO.1 |
Marine Fuel Oil Type RMG 380 (also known as IFO 380 CST)
TECHNICAL SPECIFICATIONS:
Property |
Test Method |
Unit |
Limit |
DENSITY AT 15 DEG C | ISO 3675 / ISO 12185 | KG/L | 0.9910 MAX |
KINEMATIC VISCOSITY AT 50 DEG C | ISO 3104 | CST | 380 MAX |
CCAI | KG/M3 | 870 MAX | |
SULPHUR | ISO 8754 / ISO 14596 | % WT | 3.5 MAX |
FLASH POINT | ISO 2719 | DEG C | 60 MIN |
HYDROGEN SUPHIDE | IP570 | MG/KG | 2.00 MAX |
ACID NUMBER | ASTM D664 | MG KOH/G | 2.5 MAX |
TOTAL SEDIMENT AGED | ISO 10307-2 | MASS % | 0.10 MAX |
CARBON RESIDUE (MICRO METHOD) | ISO 10370 | MASS % | 18 MAX |
POUR POINT | ISO 3016 | DEG C | +30 MAX |
WATER | ISO 3733 | % VOL | 0.50 MAX |
ASH | ISO 6245 | MASS % | 0.10 MAX |
VANADIUM | IP 501 | MG/KG | 350 MAX |
SODIUM | IP 501 | MG/KG | 100 MAX |
ALUMINIUM + SILICON | IP 501 | MG/KG | 60 MAX |
USED LUBRICATING OILS (ULO) | IP 501 | MG/KG | ** |
** The Fuel shall be free from ulo. A fuel Shall be considered to contain Ulo When either one of the following Conditions is met:
Calcium > 30 and Zinc > 15; or
Calcium > 30 and phosphorus > 15
General Description:
Present specifications are referring to the MARINE FUEL TYPE RMG 380, commercial denomination-IFO 380 CST (Intermediate Fuel Oil 380) produced from heavy and medium oil fractions mixture, obtained from primary and secondary crude oil processing.
Applications:
This product is used as combustible for maritime vessels as per technical specifications. End users are solely responsible for not using this product in accordance with producer’s prescriptions and import country legislation in force.
Safety Measures:
Product is delivered only in clean suitable means of transportation, each lot being accompanied by quality and quantity certificates. Quality is guaranteed for three (3) months starting from production date. As product is flammable, take precautionary measures for fire prevention when handling and storing this product.